What practical effects can be when adding adhesive to molecular sieve desiccant? Some molecular sieve desiccants have high activity, so adding an appropriate amount of binder can be to reduce their activity. In addition, the compressive strength of catalysts produced by independently applying molecular sieve desiccant is relatively low. Therefore, in order to better meet the requirements of catalysts, it is generally necessary to add an appropriate amount of binder to enhance the compressive strength of the produced catalysts. So, what is the key role of molecular sieve desiccant on molecular sieves?

Molecular sieve desiccants are basically non stick and have small particles.

Molecular sieve desiccants are basically non stick and have small particles. They made in powder form. Recycling carried out by adding adhesive. In general, they are compounds, but the performance of desiccants compromised by the addition of adhesives. Reducing the use of adhesives and improving the formulation of desiccants are one of the core technologies for the formation of molecular sieve desiccants. Add a small amount of aluminum oxide and appropriate dilute nitric acid to produce, and other chemical substances also added. Add some aluminum dihydrogen phosphate, aluminum colloid solution or titanium colloid solution, etc. Add porous structured pseudo thin water aluminum hydroxide nickel to sodium cyanide and water to partially melt aluminum oxide and adhere to the molecular sieve desiccant.

Molecular sieve desiccants have a wide range of primary applications.

Molecular sieve desiccants have a wide range of primary applications. This product is not only a microplate absorbent, but also a high-performance catalyst and medium. Activated carbon desiccant is a type of desiccant that can be for drying a variety of gases and liquids. Activated carbon desiccants, due to their strong ability to adsorb unsaturated fat molecules, molecular structures, and molecular structures, cannot be to dry unsaturated fat chemicals. Molecular sieve desiccant have little adsorption capacity for water. If the moisture content of some raw materials is too high, other desiccants used first to dry them, and then molecular sieves should be used to dry them.